최근검색어
The predecessor of this article is TE0713-02-200-2C. All changes are in the Product Change Notification (PCN).
The Trenz Electronic TE0713-02-82C46-A is an industrial-grade FPGA module integrating a Xilinx Artix-7 200T FPGA, USB 3.0 to FIFO bridge, 1 GByte of DDR3L SDRAM, 32 MByte Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/O's are provided via rugged high-speed strips.
All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.
All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
Key Features
- Xilinx Artix-7 XC7A200T-2FBG484C
- Rugged for high shock and high vibration resistance
- Industrial temperature range on request
- Plug-on module with 2 x 100-pin and 1 x 60-pin Razor Beam High-Speed hermaphroditic Terminal/Socket Strips (regular 4 mm)
- 1 GByte DDR3L 32-bit SDRAM
- 32 MByte QSPI Flash memory (with XiP support)
- USB 3.0 to FIFO interface bridge
- 152 FPGA I/O's (75 differential pairs) available via B2B connectors
- Programmable clock quad generator
- GTP transceiver clock (default 125 MHz)
- Fabric clock (default 200 MHz)
- External clock input for GTP transceivers via B2B connector
- 4 GTP (multi Gigabit transceiver) lanes
- On-board high-efficiency DC-DC converters
- System management and power sequencing
- eFUSE bit-stream encryption
- AES bit-stream encryption
- User configurable LED
- Evenly-spread supply pins for good signal integrity
Other assembly options for cost or performance optimization plus high volume prices available on request.
Recommended Software
Vivado HL WebPACK Edition (free version)
The Vivado Design Suite HL WebPACK Edition is the FREE version of the design suite. Vivado HL WebPACK delivers instant access to some basic Vivado features and functionality at no cost.
Overview of all editions of Vivado Design SuiteScope of Delivery
- 1 x TE0713-02-82C46-A Trenz Electronic 4 x 5 cm FPGA module with Xilinx Artix-7 200T
- 8 x screws
- 4 x bolts
Additional Information
- Manufacturer's article number: TE0713-02-82C46-A
- Trenz Electronic TE0713 Wiki
- Samtec LSHM Razor Beam, High-Speed Hermaphroditic Terminal/Socket Strips, regular 4 mm,
overview, compatibility, mating heights and speed rating: Wiki, mounted on every 4 x 5 cm module of Trenz Electronic - Support Forum
All modules produced by Trenz Electronic are developed and manufactured in Germany.