The VEEK-MT2S Development Kit is a comprehensive embedded design environment with everything developers need to create processing-based systems. The VEEK-MT2S delivers an integrated platform including hardware, design tools, and reference designs for developing embedded software and hardware platforms in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT2S features a DE10-Standard development board targeting Intel Cyclone® V SX SoC FPGA, as well as a capacitive LCD multimedia color touch panel which supports 5-point multi-touch and gestures.
The all-in-one embedded solution offered on the VEEK-MT2S, in combination with LCD touch panel and digital image module, provides developers the ideal platform for multimedia applications with unparallel processing performance. Developers can benefit from the use of FPGA-based embedded processing system utilizing mitigating design risk and obsolescence, design reuse, reducing bill of material (BOM) costs by integrating powerful graphics engines within the FPGA.
Please refer to the VEEK-MT2S Control Panel for SoC reference design in Linux touch-screen display.
Component Solution for Altera FPGAs
* ClockSolution | * Power Solution | * Ethernet Solution | * SDRAM Memory Solution | |||
![]() | ![]() | ![]() | ![]() | |||
* Inductive Component Solution | * Capacitive Component Solution | * ADC, Video, Accelerometer and Reset Generator Solution | ||||
![]() | ![]() | ![]() |
▶ Specifications
- Dual-core ARM Cortex-A9 (HPS)
- 110K programmable logic elements
- 5,761 Kbits embedded memory
- 6 fractional PLLs
- 2 hard memory controllers
- Serial configuration device – EPCS128 for the FPGA
- On-board USB Blaster II (normal type B USB connector)
- 64MB (32Mx16) SDRAM for the FPGA
- 1GB (2x256MBx16) DDR3 SDRAM for the HPS
- microSD card socket for the HPS
- Two USB 2.0 Host Ports (ULPI interface with USB type A connector) on HPS
- UART to USB (USB Mini B connector)
- 10/100/1000 Ethernet
- PS/2 mouse/keyboard
- IR emitter/receiver
- I2C multiplexer
- One HSMC expansion header (used for MTLC2)
- One 40-pin expansion header
- One 10-pin ADC input header
- One LTC connector (one Serial Peripheral Interface (SPI) master ,one I2C bus, and one GPIO interface)
- 24-bit VGA DAC
- 128x64 dots LCD Module with Backlight on HPS
24-bit CODEC, Line-in, line-out, and microphone-in jacks
TV decoder (NTSC/PAL/SECAM) and Video-in connector
- Sample rate: 500 KSPS
- Channel number: 8
- Resolution: 12 bits
- Analog input range : 0 ~ 4.096 V
- 5 user keys (4 for the FPGA and 1 for the HPS)
- 10 user switches for the FPGA
- 11 user LEDs (10 for the FPGA and 1 for the HPS)
- 2 HPS reset buttons (HPS_RESET_n and HPS_WARM_RST_n)
- Six 7-segment displays
G-Sensor on HPS
12V DC input
- 7-inch TFT LCD with pixel resolution of 800*480
- 16 million colors (8-bit RGB)
- LED backlight
- Five points multi-touch
- I2C interface
- Gesture supporting
- One Point
- Two-Point
- 3,264H x 2,448V active pixels with Bayer color arrangement
- Sensitivity 940mV/Lux-sec
- Gesture supporting
- Precise illumination measurement under diverse lighting conditions
- Programmable interrupts
- 16-bit digital output with I2C fast-mode at 400 kHz
- Programmable analog gain and Integration time
- 50/60Hz lighting ripple rejection
- Digital-output triple-axis accelerometer
- Programmable full scale range of ±2g, ±4g, ±8g and ±16g and integrated 16-bit
- Self-test
- Digital-output X-, Y-, and Z-Axis angular rate sensors
- User-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADCs
- Self-test
- 3-axis silicon monolithic Hall-effect magnetic sensor with magnetic concentrator
- Wide dynamic measurement range and high resolution with lower current consumptions
- Output data resolution of 14 bit (0.6μT/LSB) or 16 bit (15μT/LSB)
- Full scale measurement range is ±4800μT
- Magnetometer normal operating current: 280μA at 8Hz repetition rate
- Self-test function with internal magnetic source to confirm magnetic sensor operation on end products
▶ Layout
▶ Resources
Title | Version | Size(KB) | Date Added | Download |
---|---|---|---|---|
VEEK-MT2S User Manual | 1.0 | 3799 | 2017-05-05 | ![]() |
Title | Version | Size(KB) | Date Added | Download |
---|---|---|---|---|
VEEK-MT2S CD-ROM | 1.0.1 | 2017-06-06 |
Title | Version | Size(KB) | Date Added | Download |
---|---|---|---|---|
Linux LXDE Desktop (Kernel 4.5) | 1.2 ![]() | 2017-09-19 |
School: Cornell University Senior Lecturer: Bruce Land
Course 1: - ECE5760 Advanced Microcontroller Design and system-on-chip [DE2]
Course 2: - ECE 5760 Simplified Floating Point for DSP [DE2]
The VEEK-MT2S (DE10-Standard + MTLC2) Kit includes the following example designs and Linux BSP.
Regarding the DE10-Standard only example designs and BSP, please refer to http://de10-standard.terasic.com/cd
VEEK-MT2S Control Panel – allows users to access various components on the VEEK-MT2S from the LXDE Desktop BSP provided by Terasic. The relative project source codes are provided in the System CD.
Utilizing the OpenCV function to perform face detection with the 8 Mega Pixel Camera on MTLC2.
This design utilizes an embedded NIOS II CPU to communicate with the on-board digital accelerometer as well as the ambient light sensor. The accelerometer outputs as a level display and the readings for the ambient light are displayed in the upper right-hand corner.
This reference design showcases VEEK-MT2S's sensitive capacitive touch-screen capabilities. Supporting multi-paint coordinates and multi-touch gestures, this demonstration allows users to paint with five fingers. Gestures that are drawn on the canvas are displayed in the gesture indicator box left of the color palette.
This demonstration shows an e-compass on the LCD panel based on information measured by accelerometer and magnetometer in the MPU9250