필수정보

Overview

　You can connect to a device server (LNX-002, LNX-003, etc.) connected via LAN from a PC equipped with USB. LNX-001 is also a device server.
It is also possible to communicate 1: 1 with LNX-001 connected to another PC by tunneling mode.
The connected PC does not need to be connected to the LAN, and various interfaces can be controlled via the LAN even if it is not connected to the LAN due to security issues.
　LNX-001 is the FTDI are using a USB controller, a proven FTDI Inc. can be controlled by the company of the device driver.
It is also possible to operate by directly connecting to LNX-001 from another PC on the network using TCP / IP. * Mounting tools are sold separately

Features

• Connect from USB to LAN as a device server
• Connect to external network devices without using a LAN
• Equipped with FTDI's USB controller for virtual COM port and direct control
• 1: 1 connection is possible by tunneling mode (transmission mode) using two LNX-001 units.
• Automatically determines 10Base-T / 100Base-TX
• Printing to a LAN compatible printer is possible via LNX-001
• Easy device setting with setting memory card (microSD)
  • Easy migration by exchanging the setting memory card even when exchanging devices
  • Setting data can be sent to remote locations by attaching it to an email, etc.
  • There are no restrictions on the IP address to be set (can be set even outside the segment)
  • Easy backup and recording of settings by saving the settings file
• Device settings can also be made via the network (LAN) using the original setting tool.
• Powered from USB, no external power supply required
• Virtual COM port support
• Industrial design
• We will provide your original name plate
  from 50 small lot OEM units .
• RoHS Directive Regulation 10 No substance used

Connection form

[Connect LNX-001 to a computer on the LAN]

[Tunnel connection between LNX-001]

[Connect LNX-001 and LNX-002 by tunneling and use RS-232C]

[Connect LNX-001 and LNX-003 by tunneling and use RS-485 / 422]

[Direct connection between LNX-001 and LAN compatible printer]

specification

item	Contents	Remarks
Model number	LNX-001
Power supply	Supplied from DC5V USB connector (bus power)
Current consumption	350mA or less
Network interface	IEEE802.3 (10Base-T), IEEE802.3u (100Base-TX) Half - duplex / Full-duplex (automatic discrimination)
LAN connector	RJ45	ESD protection insulation (1500Vrms or higher)
Communication protocol	TCP / UDP
USB interface	USB2.0 compliant (Full Speed ​​compatible)	Can also be used with USB 1.1 ESD protection
On-board LSI	FT232H	FTDI
USB driver	Virtual COM port driver * FTDI API available
Supported OS	Windows 10 / 8.1 / 8/7 / Vista / XP
Memory card for setting	microSD card	For setting this product
communication speed	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 115200, 230400, 460800, 921600 bps
Data length	7 or 8 bits
Stop pit	1 or 2 bits
parity	Odd, even, no parity
Display LED	POW: Power indicator LED RX: Received data indicator LED TX: Transmitted data indicator LED SYS: System status LED LINK (RJ45 connector): LINK status ACT (RJ45 connector): ACT status
Operating temperature limit	-10 to 55 ° C	No condensation, etc.
Operating humidity range	30-85% RH	No condensation, etc.
Storage temperature range	-20-60 ℃	No condensation, etc.
Storage humidity range	30-85% RH	No condensation, etc.
Noise resistance	Not specified
Standards, etc.	Not specified
mass	About 80 [g]	only a main part
External dimensions	69 x 82.5 x 30 [mm]	Does not include protrusions

LNX series configuration tool

　This is an application that creates setting data for the LNX series.

　Insert the created setting data into the setting memory card (microSD) and turn on the power to set automatically.
At this time, a backup file of the setting data is created on the setting memory card (microSD).
The setting data is saved even when the power is turned off, so you do not need to insert the microSD card from the next time.
When you replace the main body of the LNX series, you can easily make the same settings by using the setting memory card (microSD).
If the PC and product are connected in the same segment, it can also be set via the network (LAN).

Product composition

• Body
• USB cable
• microSD card (with USB adapter)
• Driver CD Windows 10 / 8.1 / 8/7 / Vista / XP Compatible　 OS List
• Product manual

support

	Manual, outline drawing, etc.
	We will send you the latest Revision 3D data
	We will rent a demo machine for evaluation. If you wish, please download the loan request form from here.